How do I install the net cover of the electric fan?

2026-06-08 14:20:58

Remove the column tube and base, insert the column tube into the chassis mounting hole, and tighten the nut at the bottom of the chassis;

Remove the lifting rod from the base tube and tighten the middle fix firmly. The base installation is complete (Note: some fan lifting rods are inside the column);

Insert the mounting hole of the main unit head firmly into the round tube, engage it with the groove, and then tighten the fixing screw with a screwdriver;

Install the rear mesh cover into the main unit head, and then tighten it with the mesh cover latch;

Insert the fan blade into the motor shaft and tighten it with the fan blade nut when it is in place (Note: Loosen the fan blade nut in a clockwise direction. Do not twist it in the wrong direction, otherwise it may be damaged);

Insert the net ring into the rear net cover, then insert the front net cover, and tighten the screws in the ring with a screwdriver.